Ask Experts Questions for FREE Help !
Ask
    ntahir84's Avatar
    ntahir84 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 11, 2007, 11:18 AM
    Working under pressure
    Hi,

    I am new here. And this is my first question :)

    Ok here it goes.

    I feel that I cannot handle pressure very well. And working under pressure sometimes proves to be difficult. Not very difficult. But a little difficult. Because of the fact that I am about to enter my practical life ,as my graduation is about to be completed. So any advice on how to make up this problem?
    Canada_Sweety's Avatar
    Canada_Sweety Posts: 597, Reputation: 49
    -
     
    #2

    Jul 19, 2007, 10:27 PM
    Try calming down. Sounds simple and it really is. Just find something soothing that will calm you down. For me, I take a relaxing bubble bath... or watch TV:p but either way, you just need to find something that takes your mind off of the world. try taking a bubble bath.:)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Dodge Ram A/C working, then not working [ 4 Answers ]

I have a 2001 Dodge Ram 1500. Within the last year whenever I turn the a/c on it will work fine and after about 5 or 10 minutes will start to blow hot air as if I turned the a/c off and had the fan blowing outside air. At first I started turning the a/c off and then back on which would...

High pressure at sink, low pressure at shower [ 2 Answers ]

Hello, My sink in the bathroom has good solid water pressure. Next in the circuit is the toilet, which also has good pressure at the angle valve. The shower, however has terrible pressure. I have removed the head, and the pressure out of the shower neck is no better. Shower neck exits the...

Previously working electrical outlets stopped working [ 2 Answers ]

Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...


View more questions Search