Ask Experts Questions for FREE Help !
Ask
    jodyk123's Avatar
    jodyk123 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 19, 2007, 07:47 PM
    Kenmore dryer won't heat
    Hello, I have a kenmore 110.72822101. It will glow, then ignite for about 30 seconds then cut off. I have replaced theradiant sensor, the thermal cut off, the thermostat, and both coils. We have done the continuity test and everything looks fine. We have taken off the exhaust hose and it continues to do the same thing. If you have any ideas, please let me know. We are at a loss!
    Thanks,
    Jody
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 19, 2007, 08:06 PM
    Does the blower come on?
    jodyk123's Avatar
    jodyk123 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 20, 2007, 06:47 AM
    Yes, the blower comes on, everything works great except it doesn't heat
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Jul 20, 2007, 07:03 AM
    On the back of the drum you should have 2 vents. It just sounds like airflow problem to me. One hot air inlet and one drum air outlet. Are they both clean and open? Sounds like you have replaced everything but the gas valve? Could be the soleind on valve is bad.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #5

    Jul 20, 2007, 07:12 AM
    Sounds like it could be airflow problem On back of drum you will see 2 vents. Air in and air out. Are they both clean and open? Test the ignitor. A good one will show between 50 and 600 ohms. Is the sensor clean? Sounds like you have replaced everything but the gas valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer won't heat up [ 5 Answers ]

My kenmore dryer work's but don't heat up no more ? Why

Kenmore dryer help / No heat [ 2 Answers ]

I have a Kenmore 80 series Super capacity plus dryer. Model# 77832791 77832 that is not heating. Sounds like after it runs for about 30 seconds that it is trying to fire up but then doesn't. I consider myself to be handy and could probably fix it with some help. Any idea where I should start? Does...

Kenmore dryer won't heat [ 1 Answers ]

I have an electric Kenmore dryer series 80 which runs but won't hear

Kenmore Dryer - No Heat - Everything else works [ 2 Answers ]

Model number 11063932101 - The element will not heat, but the drum will rotate, interior light comes on, etc. I have checked the two circuit breakers - OK! I have done a continuity check on the heater element, thermal cut-off, thermostat and thermal fuse. All pass the continuity check. Also, I...

Kenmore dryer runs but does not heat [ 3 Answers ]

My Kenmore dryer just stopped heating but it runs. The model number no is 110.62994101. I need help on how to fix it. If possible with diagram on How to change any part.

View more questions Search