Ask Experts Questions for FREE Help !
Ask
    carl1989's Avatar
    carl1989 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2007, 06:50 AM
    How to replace starter rope on poulan pro sm400
    Hi,

    I need to replace the starter rope on a Poulan Pro SM400 leaft blower. I have it apart but since the old rope broke off, I don't know how to attach the new one to the wheel.

    Thank You

    Carl
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jul 18, 2007, 11:07 AM
    Take And Look At The Spring In The Rewind Housing, You Should See Which Direction The Spring Winds, Turn The Rope Housing To Tighten Spring, Line Up The Holes, Place Rope Through Holes, Tie Knot In The End Inside The Rope Housing, Have A Stop Knot At The Other End Of The New Rope And Let Go. When The Rope Is Rewound, Pull Out About A Foot And Place The Handle Onto The Rope And Secure With A Knot. All Done, Good Luck.
    P.s.
    You May Want To Wear Safety Glasses When Doing This Task.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poulan Pro Lawn Mower [ 2 Answers ]

My push lawn mower will start, but quickly sputters out. I removed the air filter to see if this was the culprit, but the results were the same. What next?

Broken Starter Rope [ 2 Answers ]

I have a Murray 20" push mower. After many years of use, the starter rope broke this morning as I was pulling on it. I'd like to replace the starter rope, but I'd like some advice before I start removing parts and screw it up worse. Any "How To" help?

Craftsman Weedeater Starter Rope Replacement [ 2 Answers ]

I'm trying to replace the starter rope on my Craftsman Weedeater. Can you tell me how to remove the clutch assembly from the shaft?

How to replace starter rope on snapper weedeater [ 1 Answers ]

I have a Snapper weedeater model #S31sngbc could someone tell me how to replace the starter rope I have most every thing apart but there is still a housing around the pully!!

View more questions Search