Ask Experts Questions for FREE Help !
Ask
    justinh's Avatar
    justinh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2007, 06:37 PM
    Hampton Bay light works, fan don't
    Have a Hampton Bay 3 speed Carousel II (childs fan). Not on a remote. Lights work fine.

    Fan quit working recently. When turned on (pull chain) you can feel/hear slight hum but the blades just don't want to run and it seems hot to the touch. It turns freely by hand.

    Anyone have any ideas? All help is appreciated.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 17, 2007, 07:26 PM
    I would guess capacitor or speed switch. Try the Sticky under Electrical and lighting. Then check Ceiling Fan info.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jul 18, 2007, 03:47 PM
    It definitely sounds like a bad capacitor.

    Ceiling fan capactors - troubleshooting and resources - Ceiling Fans N More

    But first, try these troubleshooting instructions, to eliminate anything else:

    General ceiling fan troubleshooting and help FAQ- Ceiling Fans N More
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jul 18, 2007, 03:48 PM
    BTW check the reverse switch to make sure it is firmly in position.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton bay fan remote works the speed not light [ 3 Answers ]

I installed this fan OK... it was fine for 2.5 years now the remote only works the fan speed. It does not work the lights. I removed the fan and checked connections which are good.Luckily the fans lights are in the on position and POWER is through a wall switch,that controls the lights. But I wish...

Hampton bay 7 light Track system... Nothing Works [ 3 Answers ]

Okay I installed a track light about a year ago and it has worked for that time. A few weeks ago everything failed on it. None of the lights work. I took it apart and tested the main power coming into the light, from the breaker, it tested out okay. Insdide the fixture is a transformer and...

View more questions Search