Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changing from copper to plastic water lines
[ 2 Answers ]
Hi All, I am trying to move the water supply lines for the bathroom so that I can begin framing a bathroom in the basement. The water lines are going right across the bottom of the floor joists where I need to put up the headers for the walls so I need to move them. My brother in law was...
Iron pipe vs copper tubing for gas lines, cost
[ 2 Answers ]
We want to have a dryer connected in a new area of the house. One Plumber told us it must now be steel pipe with threaded couplings--cannot be copper tubing. Is this valid? Why? What should it cost to run about 60 ft of connection line?
How to plug leaking oil heat copper lines at floor level
[ 1 Answers ]
Copper supply and return lines (1/2" copper) remain from a removed oil heater. The 3' lines are cracked at the concrete floor level and weep oil when moved. What is the best way to seal these lines at floor level? I have thought of using a wooden or metal plug, solder or epoxy. Since the lines...
Air in water lines
[ 1 Answers ]
I have a well and I have air in my water lines.I quess I need to drain water and pressure tank,if this is true then in what order.
Air in water lines
[ 1 Answers ]
I have a on going problem with air in my water lines. When the outside water is turned on either the water comes in bursts or it is steady but with air bubbles. I have a horse farm and the water lines to my paddocks & barns froze and broke last winter (30 below 0 with no snow) so all of them were... View more questions Search
|