Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat problems or furnace problems
[ 22 Answers ]
Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...
Thermostat Wiring
[ 2 Answers ]
Hello I bought a Noma Programmable Therm. Model 52-2549-0 and installed it in the winter. The Furnace worked fine, but now I tried the AC and no go. I have 4 wires. 1 set in a Green Insulation around a Red and Black wires and the other 2 wires are white and black. Here is how it is...
Thermostat wiring
[ 2 Answers ]
Hello, I purchased a RTH110B thermoset, and I need help wiring it. I have a Carrier furnace with air. The furnace has a C terminal with a black wire, a Y with a orange and a yellow wire, a GC with a black wire, a GH witch is blank, a R terminal with a red wire, and a W terminal with a white wire....
Problems with Heater & thermostat wiring.
[ 4 Answers ]
I have a single package air conditioner. I have wired up the unit and the cooling system works fine, but the heating is confusing me. The heater coils are working but the control circuit or thermosat is not right. When you turn the heat on the fan starts and you can feel the heat. After about 60...
Wiring a thermostat
[ 1 Answers ]
Recently bought a house. It has forced hot air and I want to replace my old honeywell stat with a new honeywell stat. the wire has four colors red,black,yellow and green. I've never seen anything like this before. Usually the wire has 3 or 5. so I thought it was going to work, but the stat has only... View more questions Search
|