Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Barrel Trap from Tub/Shower
[ 1 Answers ]
Hi, I'm in a pickle and am not sure what to do. I've got a drum trap that began leaking at a solder joint to it. I've looked around for a replacement, but they're hard to find. I want to replace it with a typical P trap, but I have a question about how to go about it. The existing picture...
Which Barrel?
[ 1 Answers ]
I have an ANGEL 05 and I was wondering what barrel I should get. I am a middle back person and am looking for accuracy and range among the few things. I would really appreciate any help.
PVC P-trap leaking
[ 4 Answers ]
I have just installed vessel lavatories in new bathroom. There is no problem with draining, but despite tightening I have leaks from the trap compression nuts and where the tailpiece goes into the extension. Water seems to flow down while faucet is running but shortly thereafter, it appears at...
Drum Trap Leaking
[ 1 Answers ]
I have a drum trap below the bathtub that's leaking. I have complete access to it in the basement. It looks like the bottom of the trap, where you would crank on it with a wrench, is corroded and that's where the water is leaking from. Does any place sell replacement parts for these or am I stuck...
Bathtub leaking, trap is the problem
[ 1 Answers ]
We have a bathtub which leaks into the dining room ceiling every time it drains. A plumber told us to tighten the trap cover, which sort of works. However, the screw doesn't tighten well enough to stay put and gets loose. I can't remove the cover either as the screw just turns with no bite. ... View more questions Search
|