Ask Experts Questions for FREE Help !
Ask
    Kiwi Relic's Avatar
    Kiwi Relic Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2007, 02:31 PM
    Briggs & Stratton 10.5hp ignition circuit
    Hello and greetings from New Zealand.
    I am wanting to fit a key activated ignition switch on to my B&S 10.5hp rear engine rider. The current systems is just a push button kill switch and a manually operated solenoid for the starting. As I have grand kids running around the yard on a regular basis I don't consider the current system to be safe. Can some one please explain what I would need to do to fit a key switch and key activated starting system. Thanks in advance for your help. Regards Ray.:)
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jul 5, 2007, 10:19 AM
    Go To Your Nearest Snapper Dealer And Purchase A 2 Post Keyed Switch. Have Them Draw Out The Diagram For Wiring. As I Have No Way Of Drawing It Out For You.
    If This Answer Helps, Please Rate It.
    Thanks, Mowerman2468
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

18.5 hp briggs & stratton [ 9 Answers ]

I have a 18.5 hp Briggs & Stratton model # 31P777, type # 0348-E1 that is blowing oil out of the screen on the fuel pump. It will blow out about 1 pint by the time I finish cutting my yard. Any ideas?

Briggs & stratton 12.5 [ 8 Answers ]

My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...

Briggs & Stratton 14.5hp OHV - Won't Run [ 8 Answers ]

I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...

12.5hp I/C Briggs&Stratton engine [ 3 Answers ]

I went to start my riding mower for the first time this year and when it started is smoked real bad. I turned it off and checked the oil, it was over filled. I went to drain the oil and discovered it had gas in the oil. It ran fine last year, but I didn't drain the gas out at the end of the season....

Briggs &stratton 15 hp. [ 1 Answers ]

The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...

View more questions Search