Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace fan slow to turn on, off
[ 3 Answers ]
We recently (as in last week) purchased a cabin equipped with a Day and Night forced air furnace. The fan for the furnace seems to take an awful long time to come on after the burner assembly ignites, and, similarly, the fan takes an awful long time to turn off after the furnace is turned off. ...
Furnace slow speed fan
[ 1 Answers ]
For the EXPERTS I have a Goodman GMS8 furnace with air. The manual slow speed fan setting was never hooked up at the thermostat. I believe it is just a matter of jumpering the terminals to engage the slow speed fan. If this is correct what terminals (at the furnace) do I jumper on the circuit...
Forced Air Furnace flame good, fan goes slow then fast then slow, etc
[ 1 Answers ]
Hello, I have a forced air propane furnace in a "Park Model" rv trailer. (This is a bit smaller than a mobile home) The furnace is used infrequently as the trailer is located in a sumer resort vacation area, however we do like to go up a couple of times in the winter months. Furnace was...
Convert blower fan to run slow
[ 2 Answers ]
What I would like to do is convert my furnace fan to be able to run at a slow speed all the time to continually move the air through out the house janitrol furnace:confused:
String stuck in ceiling fan?
[ 5 Answers ]
My son's balloon got caught up in the ceiling fan. After the balloon was remove there is still some string left, but its too short to turn/twist to get out. I'm afraid if I turn it on it might break the fan or worst, the friction might start a spark. How do I get it out? Call an electrical or... View more questions Search
|