[suncindy2]

HI,
I have a Kenmore Washer which worked great until a couple of weeks ago. :(

It is less than a year old. When it hits the drain cycle the water that is being pumped out backs up and leaks down my wall. It had never done this before and it concerns me. :eek: Is there anything I can do or should I call a plumber. Thanks for ya'lls help. Much aapcreciated.
Please email me also if you all have a solution at [email protected] :confused:

thanks so much!!!:)

[esquire1]

Check to make sure the drain at the wall is not stopped up and the drain hose is properly installed in drain at wall. Short of this if not too handy, make need a plumber. Good Luck