Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace Fan Motor not turning ON
[ 3 Answers ]
Hi, The fan motor connected to my furnace blower (via a belt) is no longer turning ON reliably. I can hear the call for the motor to turn ON, but the mottor just "humms" then turns OFF. Then the cycle repeats itself. If I manually push the motor pulley during the "humm" then the motor...
Murray push motor keeps turning off!
[ 1 Answers ]
Okay... I have a new to me (used) push murrray lawn mower that I just tried to use today. It was winterized and had no oil or gas in it over the winter. I filled the gas and oil... and lawnmower starts but only stays on for 3-10 seconds before it turns off on me. I did push the primer button...
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
Outside fan not turning
[ 4 Answers ]
We have a ~10 yr old AG unit. Seven weeks ago, we noticed the outside unit was running, but the fan was not turning. Oil was added. That worked for several weeks. Last week, the fan stopped again. The tech replaced the fan motor this time. Now, 5 days later, the fan is not turning again. Could... View more questions Search
|