Ask Experts Questions for FREE Help !
Ask
    ndwhyte's Avatar
    ndwhyte Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2007, 04:38 AM
    Sears elite catalyst dryer
    My sears elite catalyst dryer stop working. It turns on show its drying but does not spin or heat.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 22, 2007, 05:24 AM
    First, check your door switch. Open door. Does light come on? With door open, take your and push in on the switch. Does unit work? They have a thermal fuse on the back side. Will have to remove panel to access it. It is located on the vent housing. It is non resetable. I say it is bad. You can test with a meter. If you don't have a meter, CAREFULLY place a jumper wire (after diconnecting the leads on it)on it and see it it works. If it does, replace the fuse. Cheap repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears Kenmore Elite Gas Dryer mod.110.70092991 [ 6 Answers ]

My 3-yr.old Kenmore Elite Gas dryer has been doing very odd things! After running a load, when the dryer shuts off, or I shut it off (clear it), the touch control panel goes dead. No lights are lit. If you push the touch pad for various cycles it will not do anything. You can also push...

Kenmore Elite Catalyst Not Running [ 2 Answers ]

Machine fills with water then makes a little clunk type sound and then nothing. Emptied out several times and still no motor activity just the little clunck/click noise. From previous post I am guessing the coupler? Is broken. I cannot find model number under lid. Only this on decal SM9711035. The...

Kenmore Elite Catalyst [ 1 Answers ]

My washer is leaking while it is agitating. Any ideas?

Sears elite dryer [ 2 Answers ]

Sears gas dryer will run but no heat. It is a front load about 5 years old... Any help out there?

Sears elite catalyst washer- no water in wash cycle [ 1 Answers ]

Hi, I have a 4 years old Sears elite catalyst washer and recently I find there is no water when machine is in wash cycle. The water comes out when machine is in rinse cycle. Does anyone know what is the problem? How to repair it? Thanks Jacky

View more questions Search