Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring question
[ 1 Answers ]
I'm installing a 240 volt electric baseboard heating system that has a total watts of 5,000. A 2500 and a 1500 watt unit will each have their own wall thermostat. Then there will be two 500 watt units each with their own unit mounted thermostat. I plan on using a 30 amp breaker and 10-2 wire. ...
Amana vs honeywell stat wiring
[ 5 Answers ]
My system consists of a heatpump(amana ) / air /gas furnace. I'm presently using an amana stat (T874tg189910574101 ) and plan on changing to a Honeywell 7400 5-1-1. The amana stat uses terminals: e jumpered to w2 with tan wire , g , c / x , r , y , and o. The honeywell diagram only shows 5 wires...
Air won't turn on now-changed thermo
[ 3 Answers ]
I changed the thermostat from an old Honeywell to a programmable Honeywell 5-2. I have central air & heating is an electric water heater. I programmed it and thought all was well. I came in today and it was 86 degrees. The fan is working but not the air. I set air at 72 and the screen says cool...
Wiring question
[ 2 Answers ]
Ok, I"ll try to explain this with the best of my ability. I have recently been trying to replace some of the light fixtures in my house. I have only lived in my house 3 months so I am not sure what I have yet. I only know it is 67 years old. What I noticed is there isn't black and white wires but... View more questions Search
|