 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whole house fan
I moved the fan to a different building and I only have low speed. It claims to be a two speed motor. It was a 110v ac circuit originally and it ran much faster, and I only want high speed in this location. I did not change the plug on the motor so it's at the plug?? Recommendations.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have a jet air whole house fan with a switch that stops and starts during the cycle. The unit is less than 3yrs old. Do I need a new switch? Can I do the work myself? Your knowledge is greatly appreciated. Thank you.
I have a new ceiling fan that comes with a wall dimmer and fan speed /on and off... My house wiring is old and has only one black and one white wire,. will this switch work... I have an electrician coming to install. Paid plenty for the fan and I want to make sure...
We have a Ruud heat pump that is 12-13years old & as of the last few days, it does not seem to be heating the house very well but it has been very cold for this part of the country. It works well when the outside temp is above 50 degrees. It has been in the upper 30's and low 40's. We put on the...
I'm attempting to install a Hampton Bay 42" ceiling fan but I'm having some weirdness with the house wires. House wires are: 2 white (attached to current light fixture) 1 red (attached to current light fixture) 2 black (capped off) The ceiling fan has the following wires: 1 black (fan...
I'm attempting to install a ceiling fan with remote, but I'm having some problems with the house wires. House wires are: 2 white (attached to white wire of current light fixture) 2 black and 1 red wire (all attached to black wires of current light fixture) 2 copper grounds (attached to metal...
View more questions Search
|
