Ask Experts Questions for FREE Help !
Ask
    novicelady's Avatar
    novicelady Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2007, 10:14 PM
    Converting 15 anp circuit into 20 amp circuit
    I just bought a treadmill. The problem is it doesn't work where I want it to. It can only run on 20 amps but all my outlets use 15 amps. It keeps tripping the breaker. Can I easily convert my outlet to a 20 amp?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jun 15, 2007, 03:53 AM
    The entire circuit will need to be rated 20 amps, including the breaker and the wire. If the wire is #12, then just need to change the breaker and outlet. I doubt the wire is #12, so an entire new cable will need to be installed for this outlet.

    And, if the outlet is in a bedroom, the breaker will need to be an Arc Fault breaker.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cost of converting fuse box to circuit breakers [ 18 Answers ]

I have a 100 amp electrical service using a fuse box to which a small circuit breaker panel was added (see photo). I would like to convert the whole service to a 150 amp circuit breaker panel. I live in Rochester, Minnesota. What is your estimate of the cost of this conversion?

15 amp circuit [ 1 Answers ]

What is the max watts for a 15 amp circuit and #12 wire? Guestimating if everything was on, I would be using 2145 watts. But I would not normally do this. Allowing for vacuuming.

20 amp circuit [ 2 Answers ]

Would it be o.k. to have 10 gauge wire ran for a 20 amp circuit?

15 amp circuit load [ 1 Answers ]

Will a 15 amp circuit safely handle a 2000 watt resistance heater?

Outside GFI circuit - 15amp outlet on 20amp circuit [ 1 Answers ]

I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...

View more questions Search