Ask Experts Questions for FREE Help !
Ask
    charlene27's Avatar
    charlene27 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 12, 2007, 11:34 PM
    Shower not working
    I climbed into the shower the other day and at first it was working but after a few minutes it had completely stopped. I turned it off and now two days later there is still no water coming through the shower head although, I have hot and cold water everywhere else in the house. Can anyone suggest what is wrong and how to fix it please?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 13, 2007, 07:43 AM
    First off you have to determine just where you're losing pressure at. Unscrew the shower head and try it now. Still no pressure? I didn't think that was it but had to Now shut the water off to the valve and open it up and check and clean the inlet ports on the cartridge. Before you button up turn the water back on for a moment to flush out the supplies. If you have water form the supplies reassemble the valve and try it now. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dodge Ram A/C working, then not working [ 4 Answers ]

I have a 2001 Dodge Ram 1500. Within the last year whenever I turn the a/c on it will work fine and after about 5 or 10 minutes will start to blow hot air as if I turned the a/c off and had the fan blowing outside air. At first I started turning the a/c off and then back on which would...

Shower diverter pull-up not working [ 2 Answers ]

I had my bathroom renovated a few months ago. I went to take a shower yesterday, pulled up the diverter and it didn't stay up. When I manually pulled the diverter up - the shower still didn't work. Only the bathtub works. Is there anything I can do to fix this myself? It's a new fixture.

Shower head not working [ 3 Answers ]

We replaced our shower head, because it was leaking water. After replacing the shower head, the new one does not work. We have placed the new shower head in vinegar for a day. But, nothing happened. It still does not work. HELP! :confused:

Shower diverter not working [ 1 Answers ]

Water comes from both the shower head and the faucet. I thought that it was just a problem with the diverter on the faucet, so I bought a new one and installed it today (Danco adjustable tub spout with diverter 88434). No luck! It still comes from both the shower head and faucet. If I pull up...

Shower not working [ 4 Answers ]

We had to replace the Ball cock in the Header Tank. We switched the water back on and kitchen cold tank spluttered a lot but is now working fine but shower isn't. It is just trickling. We have tried running it for a while to clear any air locks but no luck. Any ideas?

View more questions Search