 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Valve adjustemnt
Hi I have a 16.5 ohv briggs motor and the valves need adjusted it back fires when trying to start it up I bought the motor to put on a racing lawn motor can you give me the specs on how to adjust them I know they are not set right cause when I bought it one of the rod was out he gave me one to put in there thanks
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.
My shower has three knobs and the one in the middle diverts the water flow from the tub spout to the shower. I think that means I have a 3 valve diverter valve, if not please correct me. When I turn the diverter knob so that the water comes out of the shower, there is still significant water...
On the three vlv diverter, I've removed the diverter stem, but I'm not sure how the seat comes out. If it screws out, do you have to have a special tool for that or can I improvise?
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...
View more questions Search
|
