Ask Experts Questions for FREE Help !
Ask
    sumrfn5's Avatar
    sumrfn5 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 28, 2007, 05:34 AM
    Ceiling fan codes
    I have three hunter ceiling fans. When I turn off the fans in the living room the bedroom fan goes off. How do I change the codes?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 28, 2007, 06:23 AM
    Under Canopy(At ceiling) should be receiver, change codes. DIP switches.
    Will also need to change settings on remote.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    May 28, 2007, 02:26 PM
    You change the frequency of the second fan and remote, making sure they still match. The receiver can be in a few different places inside the fan. See:

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Trouble with ceiling fan on a dual fan/light dimmer switch [ 1 Answers ]

I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?

View more questions Search