Ask Experts Questions for FREE Help !
Ask
    ellie4757's Avatar
    ellie4757 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 27, 2007, 07:29 PM
    Harbor Breeze ceiling fan installation
    I mounted a Harbor Breeze Cheshire ceiling fan(hugger) and we can only run it on low or medium because the whole thing spins on high. You are suppose to be able to lock it in place, but I can't see how. It has a horseshoe shaped piece that you are suppose to use but I don't see it. Can someone help?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 28, 2007, 07:32 AM
    Remove Fan and check wiring. Wires can't handle much turning.
    On some fans when set up for Flush, you remove three screws from top of fan,
    And secure through canopy. You don't use the ball and post, if it is type I'm thinking of.
    Have more info?
    If it uses the ball, it will have a slot, where a protrusion is place to prevent turning?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    May 28, 2007, 02:29 PM
    I don't see how the whole fan assembly could be turning unless something is not properly attached. Check to make sure the motor and mounting bracket are properly seated, and check the outlet box as well. How are you mounting the fan?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HARBOR Breeze Ceiling Fan [ 16 Answers ]

We have a harbor breeze ceiling fan. The blades have quit turning but the motor continues to hum when switch is on. Any suggestions as to what the problem may be? I called Lowe's and they told me to turn the blades by hand with the switch off and if I heard a buzz it was probably the ball...

Harbor Breeze Ceiling Fan [ 3 Answers ]

The Bulb In This Fan Has Blown Out. How Do I Remove The Globe To Change The Bulb. Model # Ac552----item # 18267 Jun 01

Harbor Breeze Ceiling Fan [ 6 Answers ]

Have a Harbor Breeze ceiling fan with remote and the power was shut off from the circuit breaker box and now my fan or light will not come on. Checked the connections, dip for the remote and reset the circuits but no luck. Any one with any ideas please pass along. Thanks

Harbor Breeze ceiling fan: [ 2 Answers ]

I have a Harbor Breeze ceiling fan with a remote only. I wired it up and it works fine but on occasions it seems to turn the light on by itself or tuen the fan off. Thus only happens when the fan is running. If it is on at night, the light sometimes turns itself on. Any ideas on why? Kevin

Harbor Breeze Ceiling Fan [ 1 Answers ]

I have recently gotten a Harbor Breeze Ceiling Fan with 4-lights installed (by a professional), remote control operated, but now it is not working! It does not operate with the remote control. Is there a way to by-pass the remote and manually operate it? Or, does the remote needs replacement? I...

View more questions Search