Ask Experts Questions for FREE Help !
Ask
    flyingreins's Avatar
    flyingreins Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 26, 2007, 03:57 PM
    1990 Volvo 760 ignition lock
    How do I remove this ignition lock, it is a 4cyl. Turbo.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    May 26, 2007, 04:38 PM
    It's likely similar to what's below:

    https://www.askmehelpdesk.com/cars-t...tml#post224842
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

'81 accord Ignition lock cylinder [ 2 Answers ]

I bought a replacement ignition lock cylinder for my '81 accord and was reading the instructions on how to change it out with the old one. Anyway, it said to insert the key and turn to the 'ON' position in order to line up the roll pin to disengage the old lock. If I had the key to turn the lock,...

1983 Jeep Wagoneer ignition lock [ 2 Answers ]

I would like to know if the ignition lock can be removed without the key

1990 Volvo GL [ 1 Answers ]

Will not start when weather is cold(north Georgia).

Ignition Lock [ 1 Answers ]

My furnace blinks 3 times repeatedly, it goes into what my furnace describes as "Ignition Lock" then it will restart after 3 hours, what does this mean and how can I change it? The house gets quite cold when it is in lock, and its to cold outside to have this happen.

View more questions Search