Ask Experts Questions for FREE Help !
Ask
    stacyemead's Avatar
    stacyemead Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 23, 2007, 11:20 AM
    Blower does not turn on
    My central A/C and heat fan will not turn on at all. What could be the cause?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 23, 2007, 01:42 PM
    Try turning the thermostat switch to on instead of auto and report back.
    stacyemead's Avatar
    stacyemead Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 23, 2007, 03:53 PM
    Quote Originally Posted by hvac1000
    Try turning the thermostat switch to on instead of auto and report back.
    Nothing happens when I put the thermostat on "On" - no sounds - nothing... neither my heat or my A/C do anything (on the "on" and the"auto" position).
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #4

    May 23, 2007, 04:47 PM
    Does the furnace have power? Is there a breaker tripped?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower will not turn off [ 1 Answers ]

Trying to install a new Blower into a 20+ year old Weather King furnace, the blower will not turn off after all wires are connected, and thermostat is set, the thermostat is as old as the furnace and does not have an auto switch, it is just a dial thermostat. What can we do or what are we doing...

Blower for furnace won't turn on [ 2 Answers ]

I have just re-lit my pilot light for the winter. The furnace is turning on with the thermostat set, but the blower isn't. If I put the blower to manual it turns on, but not in the auto setting. What do I need to do?

Furnace blower won't turn on [ 8 Answers ]

I have a Bryant 395C furnace. The blower won't come on even when thermostat fan switch is set to "on." I've verified that I'm getting 24V AC between terminals marked G and C on the furnace. Blower has 3 wires going into circuit board on furnace. These are colored red, black, and white; red is...

View more questions Search