Ask Experts Questions for FREE Help !
Ask
    w1a2y3n4e's Avatar
    w1a2y3n4e Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 19, 2007, 02:27 PM
    Kenmore electric dryer run but no heat.
    This is my first dryer and soon as 3 year warranty goes out it start to act up. I did cut off/on both the breakers to see if it help, but apparently not other than that everything works. I never look inside the dryer before so I have no idea what the thermostat nor a fuse look like and where they're located. Please help me get this fix soon as possible, because I do not want my wife to buy another one. The model no. is 110.666.42500 thank you.
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #2

    May 19, 2007, 02:33 PM
    It could be a few different problems, I'd start by taking the back off the dryer and inspect the element to make sure you don't have a broken or burnt element.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Electric Dryer Thermostat [ 1 Answers ]

I am replacing the thermostat on a Kenmore electric dryer. I need to know which terminal the red wire goes on. There are 3 terminals numbered 1, 2 and 3.

Kenmore Gas Dryer won't run [ 1 Answers ]

I have a 3 year old dryer that won't run. If I push the start button it runs until I let go. I also notice the gas heat will not start. I have checked the thermistor and thermal fuse as well as the high limit thermostat. Any ideas?

Kenmore electric dryer/ no power [ 1 Answers ]

I have an electric kenmore dryer, seems like it is not getting power. I have checked the breaker everything is fine there took off the back panel and have tested that it is getting power as far down the hot wire as I can check that leads to the blower motor. Even when you open the door there is no...

View more questions Search