Ask Experts Questions for FREE Help !
Ask
    burnoutspeedr's Avatar
    burnoutspeedr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 17, 2007, 02:23 PM
    Thermal zone pa36k-1s transformer wire diagram
    I need to know the wire color and placement on the transformer please I have a red from thermostat,red,white and a black and a gray piggybacked
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 17, 2007, 06:16 PM
    Look at this diagram. It should be close since your unit was actually made by Nordyne.

    http://www.nordyne.com/Literature/7105790.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Neutral wire is hot(has voltage potential like the black wire) [ 5 Answers ]

Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now...

How do I wire a new FHW zone [ 5 Answers ]

I have a gas fired, forced hot water heating system with 3 zones. The zones are controlled by a TACO switching relay (SR506). I would like to add a 4th zone. That is relatively simple. I can add the circulating pump, etc. and can easily connect the new thermostat. But I do not want a...

Looking for control wire on transformer [ 5 Answers ]

I am installing a new HONEYWELL T8601D2019 - it won't power on. I realize it needs a control wire connected to the C... I can not figure out which wire off my transformer is the control. I have three blue wires, a red, black, and white. Red, black and white are all connected to the unit in...

3-wire home, 3-wire fan, 2-wire remote [ 9 Answers ]

Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....

2 Wire White-Rogers with no wallplate wire question [ 2 Answers ]

Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...

View more questions Search