Ask Experts Questions for FREE Help !
Ask
    popshow's Avatar
    popshow Posts: 2, Reputation: 1
    New Member
     
    #1

    May 9, 2007, 04:28 PM
    Ceiling fan
    I just repaired a ceiling fan that was in my house when we moved in 3 yrs ago and did not work. It is now working but only one speed Is there a place that I need to check to see if working?
    eeseely's Avatar
    eeseely Posts: 100, Reputation: 3
    Junior Member
     
    #2

    May 11, 2007, 09:15 AM
    Did you replace it with a fan that supposedly had more than one speed?
    Does it have a pull-chain switch?
    popshow's Avatar
    popshow Posts: 2, Reputation: 1
    New Member
     
    #3

    May 11, 2007, 05:03 PM
    I just took it apart and cleaned the motor ans switches. There is anopther fan in the room same fan so it should have 3 speeds and reverse
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #4

    May 15, 2007, 06:02 PM
    What make is the fan? What happens when you turn it to speed 2 or 3, does it stop or stay on high? Is it a remote fan?

    General ceiling fan troubleshooting and help FAQ- Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Installed Ceiling Fan: Fan Works/Lights Quit Working [ 3 Answers ]

I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?


View more questions Search