Ask Experts Questions for FREE Help !
Ask
    JOHN KELLY's Avatar
    JOHN KELLY Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 11, 2007, 03:57 PM
    Goodman wiring
    I Am Trying To Hook Up My Ac Unit From Kenmore With A Goodman Condenser And I Need Help With A Wiring Diagram
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 12, 2007, 01:28 PM
    The outside unit only has 4 or 5 wires. Two legs of 110 with a ground and a 2 wire signal circuit that goes to the contactor from the furnace. Any new equiptment has a wiring diagram with it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace [ 2 Answers ]

How old is my Goodman furnace and how efficient is it? Model GUEQ80-4REVS Serial #910482720

Blower motor wiring on a Goodman GMP [ 2 Answers ]

I have a Goodman GMP forced air furnace running on natural gas. It is about 5 - 6 years old. It recently went out. The draft inducer would come on and the igniter would glow but then it would shut down without opening the gas valve. I checked and found that the board was never sending a...

Goodman [ 2 Answers ]

I'm shopping for a new forced air furnace. The lowest price I have is for a high efficiency furnace made by Goodman. Never heard of this manufacturer. What is the quality rating for Goodman high efficiency furnaces? Thanks

Goodman Heater [ 1 Answers ]

We have a Goodman Heater, GMT Series, that recently started to sound like it is struggling to turn on. The LED blinks three times when it is struggling and the panel says that according to the blinking, we should check venter pressure switch or vent blockage. It was eventually starting and would...

Goodman furnace [ 17 Answers ]

I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old.

View more questions Search