Ask Experts Questions for FREE Help !
Ask
    keylargo61's Avatar
    keylargo61 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 6, 2007, 09:56 AM
    54 in ancient bronze ceiling fan with heater
    I purchased the hampton bay 54 In. Ancient Bronze Ceiling Fan With Heater

    Model 00065. When it was installed it worked just fine but now the remote no longer turns on the heater and I cannot use the fan or the light by itself. Both the fan and the light have to be on. I cannot control the speed of the fan anymore. The instructions have been misplaced so I cannot check to see what the problem is. Do you have any help for me or do you know how I can get a copy of the instruction booklet.

    Thank you
    Karen
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    May 7, 2007, 04:17 PM
    I'm not familiar with any Hampton Bay fans with heaters and remotes. If the remote no longer functions as it should, I would return the fan to the store for a replacement under warranty. Most likely the instructions won't help you, unless there is some feature on the remote that got switched on accidentally. Again I am not familiar with this model fan so I don't know.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Trouble with ceiling fan on a dual fan/light dimmer switch [ 1 Answers ]

I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?

View more questions Search