Ask Experts Questions for FREE Help !
Ask
    mickdowney's Avatar
    mickdowney Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 6, 2007, 03:30 PM
    Hot water shakes when turn on
    When I turn on the hot water in the shower my pipes start shaking but not on the cold side just the hot side how do I stop it
    strangeone's Avatar
    strangeone Posts: 18, Reputation: 3
    New Member
    		  
    #2

    May 6, 2007, 06:27 PM
    Go to Lowes/Home Depot and purchase an arrestor in the plumbing department. Installation is required into your water pipe near the noise.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Turn off hot water? [ 6 Answers ]

I am trying to replace a tap but have turned the hot water feed pipe off at the valve But it still comes out. Can someone please advise me how I can stop my hot water (ideally without having to drain the whole immersion tank). Thanks

Can't Turn Off Hot Water in Tub [ 1 Answers ]

I have now tried 3 different faucets. Once installed everything works except turning the hot water off. Totally clueless!

Hot water tank how do I turn it on for my hotwater [ 5 Answers ]

I have not had hot water for 3 days I need a shower, asap , how do I light my pilot where is it I have a gas hot water tank it has a switch that says on,off,and pilot and in the instructions it says to light pilot and hold for 1 min but do I use a lighter or what where is the pilot and how do I...

I turn on the hot water and get drips [ 1 Answers ]

Hello, my problem is I turn on the hot water and drips of water comes out. I don't think it is the faucet because the cold water works fine, plus I took off the hose that connected to the pipe and no water was came out. We have hot water everywhere in the house but the kitchen. Is there a busted...

Can't turn off hot water in shower [ 1 Answers ]

How do I get the valve out to replace the washer in a 30 year old house? I thought I could open it all the way and screw it out but it doesn't want to come out. Am I doing it wrong or is there a trick? Don't want to bust the old copper pipe in the wall if I can help it. Thanks!

View more questions Search