Ask Experts Questions for FREE Help !
Ask
    handywo's Avatar
    handywo Posts: 2, Reputation: 1
    New Member
     
    #1

    May 2, 2007, 07:30 PM
    Thermostats - No power
    Thermostat worked great all winter until one hot day I tried to switch it to AC then I noticed the thermostat went dead. We have two units, one upstairs and one downstairs. The one upstairs works fine and ac running great. Please provide any suggestions before we call service man.
    JackT's Avatar
    JackT Posts: 260, Reputation: 19
    Full Member
     
    #2

    May 2, 2007, 07:39 PM
    Have you checked the circuit breaker for the downstairs air handler unit? When the thermostat goes blank it's usually due to loss of the power feeding it. You also could have a blown fuse on your 24 volt control circuit. You should also check to see if you have a overflow switch in your air handler pan, normally this is wired to shut off the outside unit only but some service techs. Wire it to shut down everything.
    handywo's Avatar
    handywo Posts: 2, Reputation: 1
    New Member
     
    #3

    May 2, 2007, 07:59 PM
    I am really a dummy with all this. The suggestions you made sound all very valid. I have at least already checked the circuit breaker which resides in the garage where the units has all the circuit breakers for everything else.

    A blown fuse. Where should I locate this to determine the fuse is blown? I have a crawl space that is 5' high. Should it be down there since the upstairs unit is on the attic.

    Can you also help locate where the air handler pan is? What should I check with the overflow switch once I locate it?

    Thank you for all these tips. You might just save me money not have to call someone out.
    JackT's Avatar
    JackT Posts: 260, Reputation: 19
    Full Member
     
    #4

    May 2, 2007, 08:09 PM
    The fuse is usually inside the air handler unit. It could be a glass fuse or a plastic fuse like you would find in a car. The float switch (if you have one) is usually attached to the pan underneath your unit. Some of the newer installations now have them in the drain line itself. The switch will probably only be a problem if the pan is full of water. When the drain line backs up water may overflow into the pan which in turn shuts off the unit. Be sure to shut off the power before removing any covers.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Car won't start, no click and no power to radio, power window or locks [ 6 Answers ]

After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...

Thermostats [ 1 Answers ]

Hope there is someone that can help me out my mother lives about an hour and a half from me and I was hooking up a thermostat for her heating and cooling unit her old unit was a rheem and the new one was a honeywell and the wiring digram was totally different is there anyone out there that can tell...

Thermostats HELP [ 2 Answers ]

Okay guys I just moved into a new place and the thermostat is way off. It's a mechanical one, so today I went out and bought a honeywell programmable one and tried to install it. The problem is the wiring which I have no clue. What is included in the honey well is: Y G W Rc Rh

Two Thermostats to One [ 2 Answers ]

I currently have a separate thermostat for the heater and the A/C... I want to combine them into one thermostat... I have replaced the thermostat before, but my knowledge of the wiring is very basic... My issue is that I have two "R" wires and I am worried about combining them together since it is...

Thermostats [ 5 Answers ]

I have a kind of off the wall question. First of all, we have a hot water boiler system which is 2 zone (1 upstairs, 1 down). I was wondering if there was such a thing as putting an extra sensor in the bedrooms that would trigger the thermostat to kick on if one of the rooms gets below a certain...


View more questions Search