Ask Experts Questions for FREE Help !
Ask
    poohbear49251's Avatar
    poohbear49251 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 22, 2007, 06:58 AM
    Kenmore dishwasher
    My dishwasher won't start any cycles. I have noticed that the start button which usually lights up a steady green light once the cycle is set to begin is flashing green 7 times and does not begin to start the cycle. Is there any way possible to reset the control panel? :confused:
    bevmartinphillips's Avatar
    bevmartinphillips Posts: 8, Reputation: 1
    New Member
     
    #2

    May 2, 2007, 07:25 PM
    Quote Originally Posted by poohbear49251
    my dishwasher wont start any cycles. i have noticed that the start button which usually lights up a steady green light once the cycle is set to begin is flashing green 7 times and does not begin to start the cycle. is there any way possible to reset the control panel? :confused:
    Hit the normal wash and hot dry back and forth 4 or 5 times this will reset
    gpezzner's Avatar
    gpezzner Posts: 2, Reputation: 1
    New Member
     
    #3

    Oct 4, 2009, 12:20 PM
    To unlock or lock the "control lock" button/red light, hold the no heat button down for six to eight seconds and the unit will reset.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher [ 1 Answers ]

I've tried just about every detergent in my dishwasher and none of them will dissolve.

Kenmore Dishwasher [ 1 Answers ]

My dishwasher recently tripped my circuit breaker and my dishwasher was stuck in dry mode. I reset the circuit breaker and it kept getting stuck in the dry cycle. My spin device in the bottom of the dishwasher melted to the heating coil so I replaced the spinner. I then repaired the timing motor so...

Kenmore Dishwasher [ 1 Answers ]

Hello, I have an older model Kenmore dishwasher which is no longer washing the dishes clean. What is the most cost-effective method; to repair or replace? Please advise.


View more questions Search