Ask Experts Questions for FREE Help !
Ask
    stewart288's Avatar
    stewart288 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 1, 2007, 12:40 PM
    Quote Originally Posted by hoodjpooh
    Gas valve does not open . light on board blinks one time. please help me find solution.
    I have a Goodman furnace. The combustion air blower works but it will not ignite. It has an electronic ignition.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    May 2, 2007, 02:51 PM
    Look for a red LED code on the PC board in the blower compartment. The code key is on the blower door.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman gas heater doesn't work [ 8 Answers ]

It's been working all right till this morning. I woke up and the room temperature was around 60 :( . All I know about it is that it is a goodman brand furnace. It doesn't have a pilot, but an automatic ignitor. We followed the instruction to reset it -- shut down the electricity, shut down the gas,...

Goodman furnace Humidifier [ 1 Answers ]

How do I hook up a humdifier to goodman furnace

Goodman furnace do not work [ 1 Answers ]

Gas valve does not open . Light on board blinks one time. Please help me find solution.

Goodman furnace [ 2 Answers ]

My Goodman furnace will light and then go out. This will occur 3 times, then will quit running. The control board blinks 1 time and tells me to Check Gas flow, gas pressure, gas valve, and flame sensor. It seems to have gas going to the valve. Could this be a bad gas valve? Or a bad Flame...

View more questions Search