 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay remote control installation
Hi, I just purchased a hampton bay remote for my hampton bay ceiling fan. I've been searching everywhere for the answer but no luck. The remote has a black, white, and blue on one side, and on the other side it has a black and a white wire. The only wires coming from my ceiling is a black, white, black/white and a green wire. I understand that the black goes to black, white to white, blue to black/white and the green is the ground. But the other two wires on the remote(white and black) where do they go? Any help is appreciated:D
|
||||
|
||||
|
Ok, the three wires from your fan connect to the set of three on the remote:
Black - black White - white Blue - blue or black/white striped The other two wires from the remote connect to the ceiling Black - black White - white All grounds connect together. Ceiling fan wiring - Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...
I am trying to understand the installation procedures for installing a remote control into a Hampton Bay (Mod. 197 878) Grammercy Fan. The reomote receiver has a total of 6 wires. One is the antenna wire, and that speaks for itself. There are black, white and blue wires on one side, and I...
I moved to a new home a few months ago. The fans that are installed have Hampton Bay remote controls. In our master bedroom, when we turn on the light, the fans also start. In summer it was okay, but now we only want the light on. When we lower the fan to the minimum of "Low", the fan still runs...
I've just installed a Hampton Bay Reddington IV ceiling fan, and I'm not sure about the directions to install the wireless remote. The remote has five wires coming out of it. 2 white (AC IN N, MOTOR N), 2 black (AC IN L, MOTOR L) and 1 blue (FOR LIGHT). However, I've only got 3 wires coming out...
View more questions Search
|
