[ThomasCKeat]

Before I replace the bathroom subfloor,mason board & tile, How to run some floor heating. I consider myself able to do this with Electric if someone could direct me properly. Job will be inspected must be code. And I can access the floor also from the sheet rock ceiling below. Live in New Jersey

[tkrussell]

Do a web search for heated floors, there are several that offer these systems. They are somewhat tedious to install, getting the mat properly mounted, bringing the feed wires to a power source and thermostat.

Check out: Nuheat: The leading radiant electric floor heating system manufacturer. Under floor heat for a warm floor. and Warmup | Radiant Floor Heating - Radiant Heat for a Heated Floor

And review the installation instructions to get a sense of how these are to install, and do not hesitate to get back with any specific questions on these systems.

[ballengerb1]

Tk was being nice when he said tedious. Many of these floors come as a kit and you won't do any work from below. The last one I installed goes between the tile and the sub floor via mounting in a bed of ceramic tile mastic. As Tk points out the hardess part of the job is getting your supply line to a convenient location.