Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace fan/blower does not turn on automatically
[ 6 Answers ]
I have a furnace, which worked well until today. The furnace fan/blower can be turn on manually (switching to ON position from the thermostat--Maple Chase 9600). However, when the fan switch is switched to AUTO position, and the room temperature is below the setting temperature, the furnace is...
Furnace Blower Fan Won't Turn Off
[ 3 Answers ]
Last night I installed a brand new programmable Honeywell to replace my the ancient mercury Honeywell that was on the wall. I have a 20+ year old forced air gas with central air. The side effect has been that the furnace blower will not shut off. Whether the system is in "heat" or "cool" or...
Thermostat Q - Blower Does Not Turn ON in FAN Auto Mode
[ 10 Answers ]
I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,...
Attic blower fan won't turn on
[ 1 Answers ]
Central air with blower in attic. No air blowing from the unit. If I switch to "manual" for the fan, I can hear a humming noise but the fan will not turn. "Squirrel cage" fan appears to move freely.
Rth7000 fan or blower does not turn on.. Help!
[ 3 Answers ]
Hello, I just bought rth7000 programmable thermostat to replace the original thermostat. Unfortunately, after installing the new rth7000, it powers up and I can access the setting on the thermostat and I also hear it clicking when I try to turn on either heater or ac but nothing blows out, no... View more questions Search
|