Ask Experts Questions for FREE Help !
Ask
    nkn's Avatar
    nkn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 25, 2007, 03:46 PM
    Angular speed of the mass
    The ball with mass m connected by means of two massless strings to a vertical rotating rod. The strings are tied to the rod and are taut. The tension in the upper string is T1. (Each angle of an and equilateral triangle is 60 degrees.)

    What is the angular speed of the mass?
    vrooje's Avatar
    vrooje Posts: 28, Reputation: 2
    New Member
    		  
    #2

    Apr 26, 2007, 03:12 PM
    I'm having trouble visualizing this problem. If there is one mass, why are there two strings (apparently one of them an "upper" string)?

    Have you tried this problem yourself?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Relationship between Mass and Speed. [ 8 Answers ]

What is the formula for how much mass increase there is based on how fast an item is moving? Example: If an object of "X"lbs mass at rest is moving at "Y"mph, what is it's mass at that speed? Thanks! Edit 10/10/05: See http://www.jackson8.com/science/relativisticmass.html

High-speed Cable/low Speed Operation [ 1 Answers ]

I had Time Warner Cable(TWC) Road Runner service(high-speed cable) installed recently on my Panasonic CF-47 Laptop. It turns out that it operates two times SLOWER than Dial-Up!! I have a W98 O/S. The High-speed cable into the computer measures normal(as measured by a super-tech with TWC). After he...

Angular speed [ 2 Answers ]

When using the Speed= distance/time how would one go about plugging numbers in if the question in a wheel has the diameter of 7 and rotates 1700 revolution per minute. I know you use the Circunfrace which is 14pie then what do you do about the 1700 revolutions; where does that fit in? If any one...

3 speed ceiling fan only has 1 speed [ 3 Answers ]

I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...

View more questions Search