Ask Experts Questions for FREE Help !
Ask
    charlie red's Avatar
    charlie red Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 25, 2007, 03:35 PM
    Heat pump
    I have a heat pump which I use to heat my swimming pool. I want to try to use it to cool the water as well. The manufacturer claims that it cannot be done. I'm wondering if anyone else has attempted this?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Apr 25, 2007, 06:43 PM
    To many problems will be encountered for this to work properly unless you have the knowledge to build/design a system for this purpose.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Electric Heat-Pump-No heat [ 2 Answers ]

I had a wall-mounted unit installed in a room in may of this summer. In the middle of the night the heat shut off and has not come back on since. It is an Amana, electric heat with heat pump unit. The cooling works, the heating setting does not blow air at all. When I remove the cover it says...

Heat pump stuck in heat mode [ 4 Answers ]

I have a heat pump that seems to be stuck in heat mode. When you try to turn the a/c on it runs heat. I got the a/c to run by cycling the power a couple of times but after having to use the heat again, it is stuck again. Could this be an electrical problem or is it probably the reversing valve?

Heat Pump - Emergency Heat [ 2 Answers ]

My heat pump keeps changing itself to the aux heat. Can you tell me why it is doing this and how I can prevent it from doing it.

Electric heat pump auxilery heat problem [ 4 Answers ]

Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not....


View more questions Search