 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Leaky Tub faucets
I need to know what makes the valves inside the hot and cold handles on a tub leak.. Then how do I remove the stems and make sure they are still sealled correctly? I know to turn water off.. I just want to know how to back out the stems and explore for damage or replacement vaulves?
|
||||
|
||||
|
Kissler & Co., Inc. take a peek here
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have two tubs with Delta one-ball handle controls. Both of them leak out of the spout. When the showers are running the tub spouts stop leaking. I found some sites that describe how to remove and repair the washers etc on the Handle, but is a spout drip caused by problems in the handle...
I recently bought a townhouse that had the upstairs bathroom redone completely with a walk it tile shower. I have been there a year and recently noticed that the grout is slightly cracked around the base (floor and walls). I have also noticed mold that I have sprayed in the grout (Since leaving...
I am trying to get the estuechon(flared shell) off tub faucets to replace the washers on the valve stems. They are threaded on and have corroded so badly that I cannot turn them to remove so I can get to the valves. Does anyone have ideas on how I might get these off without tearing them to...
We have had a chronic leaky faucet in our deep soaker tub for a long time (over a year). We have been unable to remove the taps successfully and don't own proper tools (pliers, proper wrenches, etc.) so we have decided to call in a professional to change the fixtures altogether (they are...
Good evening! I am trying to remove the bolts that hold the stems of the hot and cold water faucets on the tub. I'm using a cresent wrench and it's almost rounding the edges of the bolt. I've sprayed WD-40 in between the bolt and water pipes but they haven't budged yet... I'm trying to get the...
View more questions Search
|
