Ask Experts Questions for FREE Help !
Ask
    bigdawg5115's Avatar
    bigdawg5115 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 23, 2007, 07:34 PM
    Hot water heater
    My hot water heater is about 3-4 years old I just replaced the elements in it and drained it, I have notice a lot of build up in the bottom of it how do I get that out of there, or do I need too.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #2

    Apr 23, 2007, 08:13 PM
    It is hard to get the sediment out of a heater but there a couple of things you can try. One connect as hose to the drain faucet at the bottom of your heater. Leave the water pressure on and open the drain valve, let the water run till you see no more deposits coming out.

    A better way is to turn off the power, turn off the water supply, take out the bottom element and make you a walking cane shaped crook our of a piece of metal and scrape the sludge out the open where the bottom element was. At just a shot of water if you need it to keep scraping the stuff out.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New water heater, hot water in shower only lasts 3 minutes [ 40 Answers ]

I have been in this apartment 6 months and have never been able to have a warm shower longer than 3 minutes. I told my landlord and he replaced the water heater. But that didn't solve the problem. So he had a plumber come over and the plumber said maybe the water heater was defective. But then he...

Brand new water heater: Starts hot, then water gets cold after few seconds [ 9 Answers ]

We just moved into a brand new condo which has its own water heater. We went to take a shower this morning and the first few seconds of the shower were very hot, then it went cold after 10 seconds. We tried again after half an hour, same thing. There was enough hot water for my husband to shave but...

New water heater, no hot water pressure in 2 bath/showers [ 3 Answers ]

A new water heater was installed yesterday, but I have no HOT water pressure in either of my showers. Is it the old fixtures, or a leaking pipes?

No hot water - hot water heater and cold working [ 1 Answers ]

HELP! Its freezing out and we have NO hot water! Cold is working fine everywhere - but nothing comes out of the hot side anywhere. The hot water heater appears to be working? Did the hot water pipes freeze? Why the hot side and not the cold? Please help.

Hot Water Heater not keeping water hot [ 1 Answers ]

Hi I am having trouble with my hot water heater. I believe it's a gas water heater. I have a problem with my water not staying hot. I have no problem getting hot water in the morning if I've run the dishwasher or the washer the night before. However If I haven't used much water recently, the...


View more questions Search