Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Red light flushing-State Select water heater
[ 0 Answers ]
I have a State Select water heater PR650 NOVETCGA. The red light on the control panel is flushing. I didn't find anything on the manual. So, what can be? If I reset(turn off and then on the power) it works for a while or for longer time but eventually stops and the red flushing light pop up....
State Select Gas Water Heater?
[ 1 Answers ]
I have been requested to install a drip leg/sediment trap on the gas supply to the water htr. The heater was installed in 2008.is this a code requirement now if it is does it need to be installed on a4yr.old installation
State Select hot water heater
[ 1 Answers ]
I have a state select gas hot water heater with the blower. The GFI keep tripping and turning the heater off. I've replaced the GFI but still shutting off. I push the reset button and will do great for a few days then trip again. Any ideas?
State Select Water Heater
[ 3 Answers ]
We have a state select power vent water heater. Last October it stopped working and the plumber replaced the ignitor as the wires had shorted out. Then it happened again in the beginning of January 2008 and he again replaced the ignitor. Well, our water heater stopped working again today and the...
State select water heater
[ 1 Answers ]
My state select electric water heater,just stop working and I don't know how to bringing back to work,any ideas. View more questions Search
|