Ask Experts Questions for FREE Help !
Ask
    Jim Chrzanowski's Avatar
    Jim Chrzanowski Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 30, 2018, 10:27 AM
    State select pr650nrrtl5w ng water heater
    What is the size or part number for a anode rod for this heater

    What size or part number for an anode Rod for this heater Pro650nrrtl5w
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    May 31, 2018, 05:48 AM
    Hi Jim

    Try calling STATE INDUSTRIES directly @ 1-800-365-0024

    They will need the model number and serial number of the unit to help you.

    Good luck!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Hot water heater [ 9 Answers ]

I have a state select hot water heater. I am all of a sudden continuously hitting the reset button (in the hot water heater), any idea what is making this happen and can I replace the braker in the hot water heater. I am assuming it isn't the element because the water does get hot, that is until...

State Select Water Heater [ 0 Answers ]

Why does the pilot just go on for a few minutes and then goes out?

State select hot water heater [ 1 Answers ]

Want water to be hotter

State Select hot water heater [ 1 Answers ]

I have a state select gas hot water heater with the blower. The GFI keep tripping and turning the heater off. I've replaced the GFI but still shutting off. I push the reset button and will do great for a few days then trip again. Any ideas?

State Select Hot Water Heater [ 4 Answers ]

How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool. Thank you.:)

View more questions Search