Ask Experts Questions for FREE Help !
Ask
    cahill's Avatar
    cahill Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2007, 11:14 PM
    Kenmore elite dryer
    I have A kenmore elite dryer that needs a new heating element. I got the part, but where is it located in the dryer, the back is spot welded shut?
    RichardBondMan's Avatar
    RichardBondMan Posts: 832, Reputation: 66
    Senior Member
    		  
    #2

    Apr 21, 2007, 07:32 PM
    Place it on it's side or front, you should see that the bottom is just open space. Whether I am correct depends on your spefic model, so if it's not accessible from the bottom, I don't know. Try going to Sears. Com, click on parts, put in the model number that shoud be on or near the door or near the door on the front.
    RalphS's Avatar
    RalphS Posts: 120, Reputation: 12
    Junior Member
    		  
    #3

    Apr 21, 2007, 10:24 PM
    Quote Originally Posted by RichardBondMan
    Place it on it's side or front, you should see that the bottom is just open space. Whether or not I am correct depends on your spefic model, so if it's not accessable from the bottom, I dont know. Try going to Sears. com, click on parts, put in the model number that shoud be on or near the door or near the door on the front.
    In 37 years of servicing dryers, I have NEVER seen a dryer that you service from the BOTTOM!:eek:
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Kenmore elite dryer [ 4 Answers ]

My kenmore elite dryer is not getting hot what could be the problem? I was thinking it may be the heating coil, if so where would it be located? Any other suggestions?

Kenmore Elite dryer [ 1 Answers ]

I have a Kenmore Elite dryer that is 7 yrs old. There is a panel on the front bottom of the dryer. When the dryer is opened to remove clothes there is a removable filter that slips into that bottom panel that must be cleaned after every use. The dryer is not drying well, which leads me to...

Kenmore Elite Dryer [ 3 Answers ]

From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...

View more questions Search