Ask Experts Questions for FREE Help !
Ask
    ndrpayne's Avatar
    ndrpayne Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 10, 2017, 11:10 PM
    Dimming light fixture for ceiling fan cycles without touching it.
    Installed a universal fan light on our hunter ceiling fan that has high light, low light, and off. It cycles through the phases without being touched. Drives us crazy.
    How to fix it?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Aug 11, 2017, 05:39 AM
    My first thought is to return it to the store as defective.

    Since you have provided no information on the model of the light pack or the installation instructions we are at a loss to help you.

    How does the light pack connect (electrically) to the fan? How is the light pack supposed to work, from a wall rotary switch, remote control?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Aug 11, 2017, 08:47 AM
    If it has a remote, try removing batteries.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I wire a new light fixture to a diff area on the ceiling to an existing light [ 1 Answers ]

I have an existing light fixture connected to a dimmer switch and three recessed cannon lights connected to a different switch. I would like to install two pendant lights over my counter bar table but there is no exposed wiring pre-exposed for that. It's closest power source could be the cannon...

Ceiling light fixture blew two light bulbs in 2 weeks? [ 1 Answers ]

I have 2 ceiling lights in one room that turn on with a single switch. One works fine every time. The other has blown 2 lightbulbs in 2 weeks (incandescent). There were CFL's in them earlier and I took them out to replace them with the incandescent type. The first one seemed to burn out after a...

I have connected the light ceiling fixture but the light remain on cannot switch off [ 7 Answers ]

I have two black wires, one red, one wihite out of the box. I have connected the two blacks with the black fixture, and white with the white fixture wires. The red is not connected. The light (florescent U-tube light) comes on, but stays on, regardless of the switch being in the on or off position,...

Ceiling fan light dimming by itself [ 2 Answers ]

We have a ceiling fan with a wall mounted remote. The light started dimming and brightening on it's own. :eek: In the past, the light would occasionally turn on by itself. Any clues what would be doing this?

Dimming a Ceiling Fan Light [ 1 Answers ]

We have Hampton Bay ceiling fans installed on double (bipole) switches. Is there a way to use the existing wiring to provide separate control for the fan and the lights so we can put a dimmer on the lights? Or is there another way to dim the lights - would a remote do this?

View more questions Search