Ask Experts Questions for FREE Help !
Ask
    cruzen7's Avatar
    cruzen7 Posts: 11, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2007, 01:46 PM
    B&S 11hp Riding Lawnmower
    Mower was running fine - had to put it in reverse and now the brake/clutch is stuck all the way down - you can change into any gear(which I'm guessing means the clutch is depressed) - will not go into gear though and will not move - How can fix this?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 21, 2007, 06:17 PM
    There are several things to check but I would first look at the belt to make sure it didn't break. While you are down there check the spring on the tensioner pulley. The tensioner is between the engine pulley and the transaxle pulley. If everything is Ok come on back.
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #3

    Apr 23, 2007, 10:25 PM
    There is a parking brake lock lever, when pedel is fully depressed lever can be moved to lock it. Find and release lever.

    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My murray 11hp riding lawn mower will not start. [ 1 Answers ]

I have tried all I know to try and still my murray 11hp mower won't run. I need to know if there are any more fuses besides the one by the celenoid. I replaced the battery, starter switch, celanoid, sparkplug, and 15amp fuse by the celenoid. Are there any more fuses that I should look for? ...

15.5 briggs & Stratton "Craftsman Riding mower [ 7 Answers ]

I have a Craftsman 42" Riding mower that's approx 5-7 years old. It runs great when it runs, but when I try to start it up is when I run into trouble. Ive replaced the battery... brushes in the starter... fuel filter... cleaned all the battery connections including the ground on the frame. It...

Murray riding lawnmower [ 4 Answers ]

I need help putting on the belt. Is there a diagram - as I have lost my book -

Craftsman 11hp riding mower [ 5 Answers ]

I have a friend who has an old Craftsman 11hp riding mower and is having some problems. The ignition switch was broken and has been started with a screwdriver until it finally broke. I got a replacement switch today and installed it and now as soon as it is put in the "on" position the engine...

Lawn Chief 11hp B & S [ 2 Answers ]

Hey I got a Lawn Chief Brigg and stration 11hp And the lights don't have any wire connecting to them so they don't work. Any idea where the wires come from so they will work? Thanks for your help.

View more questions Search