Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Ceiling Fans
[ 8 Answers ]
I recently moved into a house that had beautiful ceiling fan in the master bedroom. This fan's blades have a ticking noise that increases as the speed is turned up. They are the snap in type blade not screw-in. I have tried to remove and replace them, used shims, and balanced the fan over and over...
Hampton Bay Ceiling Fans
[ 4 Answers ]
Just bought a new Hampton Bay ceiling fan and it was installed by the contractor doing other work in our house. When the four (4) lights are on in the fan, after some time (one hr or so) the lights go off by themselves... also, if the fan is off, after a while it goes on by itself. The light is...
Hampton Bay Ceiling Fans
[ 1 Answers ]
I bought a Hampton Bay Ceiling Fan 52" 5 blades/3 speeds 2 months a go on Home Depot and now one of the speeds isn't working anymore,I have only slow and fast (or medium,i'm not sure) What should i do? I know that inside there is a small plastic box, a "circuit brake" system, seems that...
Hampton Bay ceiling fans
[ 5 Answers ]
I have a HB ceiling fan that is mounted very close to the ceiling (there is no space between the fan housing and the ceiling cover. The ceiling cover has no removal screws and is one piece and appears attached to the top of the fan housing. I was able to unscrew the fan motor shaft from the top...
Hampton bay ceiling fans
[ 2 Answers ]
Does anyone know how critical it is to ground a ceiling fan? Is it OK to two wire it from a swag chain? Or will this electrocute someone? View more questions Search
|