 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Callaway II 54 inch ceiling fan receiver replacement wiring and antenna
I am replacing the receiver on a Hampton Bay II 54 inch ceiling fan. The replacement receiver has an antenna wire and the old receiver has a black wire screwed to the base. Am I OK without that black wire screwed to the base?
|
||||
Check out some similar questions!
I have a Hampton Bay ceiling fan Model UC7030t that has a bad receiver. Where can I get a replacement?
My fan does not respond to the hand held remote. I have checked the dip switches and even tried a different remote. It appears that the problem might be the receiver in the fan. If receiver is indeed the issue then where can I purchase this part? Furthermore, where can I find the instructions...
Model 483-112
We have a Skylark dimmer switch. Coming from the ceiling we have a blue wire, black wire, white wire, no ground that we can see. We had a fan with a light kit that was connected black to black, white to white, blue to blue. We swapped out our old fan for a new "5 minute" (ha!) Hunter fan. ...
This will probably be the first of several posts. My house was built in the 70s, most likely by people on acid. :D I have removed my ceiling fan from the ceiling and the wires WERE as follows: Black to Black White to White Blue (fan) to Red (ceiling) My new fan (Hampton Bay Vercelli)...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
