 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Disassembly reassembly procedure 1999 Camry 5SFE Balancer Assembly
Does anyone have the torque and bearing clearance specs for the balancer assembly. I want to disassemble mine to check for metal. Engine spun a rod bearing and there was metal in the other bearings so I'm fairly certain the balancer assembly will have metal in it as well.
|
||||
Check out some similar questions!
There is a hole in the top of my radiator. I was still driving my camry around but had to stop when it started to run hot. I just purchased a new radiator. How difficult is it to replace. Do I need to do something to prep the vehicle and how many people and hours will it take? Thanks.
Toyota camry 1999, it starts but when you put it to drive and steps on the gas it won't run.
Rebuilt the 2.2L engine and had to use another 5S block as the original was beyond oversizing. Problem is selecting correct shims for the balancer assy. First, I was not able to borrow/find the SST (09224-74010) in a timely fashion. Second, only have a "puny" .001 dial indication, so I can't...
I need to know if the bolt that is used to take the harmonic balancer on a 199 Saturn with the 1.9 Liter is left handed or right handed threads
I have a 1995 Toyota Camry with a 4 cylinder. I had to pull the motor due to what sounded like a TERRIBLE rod knock. I have a new motor already and I am swappin parts from old to new. The old motor has what I have since found out is called a balancer on the bottom of the motor. I have no idea what...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
