Ask Experts Questions for FREE Help !
Ask
    roughneck2000's Avatar
    roughneck2000 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2016, 02:54 PM
    Pressure switch
    My question is as follows the direction you gave for increased water pressure on a well. The turning of the small screw will increase the pressure will that work w a 30/50 switch as wll
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Dec 18, 2016, 07:29 AM
    The small nut will increase/decrease cutoff pressure only. Tighten to increase, and loosen to decrease. This video will help you. Yes, it will work to adjust a 30/50 switch.

    how to adjust water well pressure switch - Bing video
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

We replaced the pressure switch, gauge and water tank and the pressure still clicking [ 2 Answers ]

Water pressure high and low... pressure gauge up and down and switch clicking on and off... we replaced the water tank, gauge and pressure switch with no luck.. what is wrong?. could it be the water pump?

I want to replace Air Pressure Switch has 3 wires with Air pressure switch has 2 wire [ 7 Answers ]

The air pressure switch in my furnace has 3 connections, and I need to replace it with an upgraded part which has only 2 connections. 2 of the wires have the same color,Rose, while the third wire is red. Any help how to connect?

Had no water banged on pressure switch started working so changed out switch worked [ 7 Answers ]

Had no water Friday night. Banged on switch sat morning and it starting working for a few minutes. Changed out switch sat. afternoon work until Monday morning. Now now water and the breaker is tripped. When I wired it up I put the two wires coming from pump one red and the other black on the two...

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

View more questions Search