Ask Experts Questions for FREE Help !
Ask
    VFCorbett's Avatar
    VFCorbett Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2007, 08:13 AM
    GFI plugs on 220 window units
    Why would the GFI plug on my 220 window unit trip?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 20, 2007, 09:41 AM
    How many times has it trpped and are you able to reset it. Is it near in a bedroom or near plumbing?
    JackT's Avatar
    JackT Posts: 260, Reputation: 19
    Full Member
    		  
    #3

    Apr 20, 2007, 12:30 PM
    You may have a problem developing with the either the blower motor or the compressor going to ground. You'll need a good ohm meter or meg-ohm meter to check them. It could also be a bad connection or short.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GFI plugs on 220 window units [ 1 Answers ]

Why would the GFI plug on my 220 window unit trip?

Colder Plugs? [ 1 Answers ]

I was searching the net for something I can't remember and came across this Civic faq on 92-95 civics by txgreasemonkey. It stated that engine knock on a 93 civic dx was solved by using a plug 2 steps colder ...

Spark Plugs [ 2 Answers ]

I have a 1986 Oles with a V8 engine and 125,000 plus miles and the spark plugs have never been replace. My question is should I be concerned about them breaking off leaving the threads in the head? If so what can I do to prevent it?

110 v plugs [ 3 Answers ]

Can somebody tell me how to connect a 3 pin plug( UK) to a cable from USA? I need to know which is live and which is neutral. Thank you

View more questions Search