Ask Experts Questions for FREE Help !
Ask
    vkillen's Avatar
    vkillen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2016, 09:18 AM
    Do you have design house 59' 551390 with one faucet hole?
    Does model 551390 vanity sink top come with only one faucet hole?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Nov 15, 2016, 10:29 AM
    Usually, they make these sink tops in 3 versions: Single hole, then for 4" faucet ( 3 holes, 2" apart ) and for 8" faucet ( 3 holes, 4" apart ). Go to Service Desk at Home Depot or Lowe's and talk to the people there. I am sure they will be able to order one for you

    If you have Single hole faucet and don't mind the look, you can use sink top with 3 holes ( 4" on center / left to right hole ). Faucet manufacturers usually supply a plate that goes under the single column faucet. That matching plate covers the two extra holes on sides and middle hole is where faucet installs.

    Hope that helps

    Milo
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Nov 15, 2016, 03:14 PM
    Design House is just a sales company. What you are looking for is a very common design. HD and Lowe's can order a sink from their supplier with any number of holes. I ordered a cast marble sink, scalloped bowl with a single hole from HD-No problem. You will not find it on line, just go to the store.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Faucet hole size [ 1 Answers ]

I bought a vessel sink with a single hole on top for faucet. The faucet hole is 1.375". The faucet I want to buy is 1.125" will that work? Or do the sizes need to match perfect? THANKS

Five Hole Sink Faucet [ 3 Answers ]

I am looking for an 8" deck mount faucet for a three compartment home sink. Compartments are Bowl-Disposer-Bowl. Faucet setup is: (1) Soap Dispenser (2) Pull up for left compartment Basket (3) Single lever faucet and spout (4) Pull up for right compartment Basket (5) Hose & spray.

4 Hole Kitchen Faucet Template [ 1 Answers ]

I am installing a 4 hole Price Pfister kitchen faucet in a corian counter top. There is currently a single hole faucet there and I need to locate a template to use for the holes. Is there anywhere I can print the template from? I am very handy, but never too proud to take suggestions. Thank you

Bath faucet hole expansion [ 2 Answers ]

I am in the processing of installing a brand new wall mount faucet in an older cast iron bath sink but I'm finding that the center faucet hole in the sink isn't quite large enough for both the spout and the push rod. How can I expand the hole or drill a new one to make room for both parts without...

Corian Counter-Faucet Hole too small [ 1 Answers ]

I'm trying to replace a kitchen faucet. The center hole is too small in the Corian counter. It's pretty close though. The hole probably only needs to expand by the width of the treads on the faucet, maybe 1/8". Any ideas on how to enlarge the hole without cracking the counter?

View more questions Search