Ask Experts Questions for FREE Help !
Ask
    harf's Avatar
    harf Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2016, 11:26 AM
    Johnson Furnace Company Bellevue Ohio
    I have an old johnson furnace the squrrill cage is making loud noise I believe the bearings are gone where can I get a new one ?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 13, 2016, 02:51 PM
    Squirrel cage? Probably never. Bearings?? Pretty common. You will need to pull one out and go to a mechanical supplier-Grainger for 1. Even HD and Lowe's stock some bearings.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Johnson Furnace Company Bellevue Ohio Model Nas 160L gas furnace [ 1 Answers ]

I have in my home a Johnson Forced air Furnace second floor installation, now that being said my home was built in 1974. The furnace is in a small room (12X7ft) and this room get hottier than I think it should like a 85 maybe 90 degrees. But now the pilot lite won't stay lite after the furnace...

Johnson Bellevue Ohio [ 1 Answers ]

Info on Model G 31 65A Imput 65,000 output 52,000 Serial 021113. Also it has 3 wires brown-white-black I'm guessing black and brown go to black live, and white goes to white ?

Johnson corp furnace [ 0 Answers ]

I have a HAS80AD natural gas furnace,, looking to change unit what brands could I use to replace it that don't have to do major rework on duct work?

Johnson corporation bellevue Ohio furnace [ 1 Answers ]

Hi, I have an older model furnace from your company, here are the ID numbers to it: Model Number HAS105B Serial Number 158738 Other numbers on the unit show: 05J57-JEO23

Johnson furnace company bellevue Ohio [ 4 Answers ]

I have an older Johnson Furnace Co furnace in one of my units, I recently have a problem with the heat. It seems to go through the process with spark and fan etc but it won't light. It's an older model 48 HWC. Where would I start to testing this unit? And if I were to find the issue would parts...

View more questions Search