 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Help with heat pump
I have a Miller heat pump I had the heat on and when I switched off I went to cool mode and now seems like it heats on the cool mode and cools on heat what did I blow up on it Im sure its something to do with the reversing valve or the board heat pump is about 6 yrs old thanks
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a newly installed ruud 13 seer heat pump, it works fine. It emits a constant hum,louder sometimes than others, this hum continues when machine is off, it will only cease when power is off to machine. I have heard various transformers sound similar,but should this heat pump make this...
Replaced tstat.. tech added 2 lbs r22.. but it didn't register on his gauge that he had added any... worked for a day.. didnt need heat for 3 days... then had to reset house electrical for cooling to come on... now heat cme on for 5 minutes then went into aux heat...
I have a 4 ton ruud heat pump with gas pack the heat pump quits when it gets 39F outside and furnice kicks in but does not ignite and I smell no gas what could it be
Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump
I am trying to replace the thermostat for my heat pump the one I've got seems to be running the emergency heat only. All wires were connected as they were in the old one. Is regular heat and emergency heat considered multi-stage? If so, I need another thermostat... please advise.
View more questions Search
|
